In September 2027, I’ll be heading to Alaska aboard the Discovery Princess for a very special knitting cruise – Dancing Lights: Alaska 2027.
I’ll be teaching knitting workshops, sharing two specially designed projects, and, of course, there will be plenty of knitting, laughter and time spent enjoying Alaska through a designer’s eyes.
The cruise information is now live, and I’m delighted that I can finally share it!
There is so much more to come. Over the next year I’ll be sharing peeks at the projects, yarn, inspiration and some of the preparations happening behind the scenes.
I love working with beads in my knitting. I try to add them to lace knitting at every opportunity. These are a few of my favourite pieces. They each have a story.
Some, like the beaded lace hat, Galadriel’s Gift, I have knit multiple times. The painted circular shawl is the Garden Gate Shawl, showing my favourite pictures of one of my painted pieces. The Shetland Fascinator, the little lace shawl, has the prettiest little beaded tassels.
Rhiannon’s Wrap, the purple shawl, is the most beautiful thing that I ever knit, that never won a prize. A story for another day. I never wrote a pattern for this large version. But there is a pattern for a smaller version, the link is attached to the beaded tassel photo in another gallery in this post.
And Covid Be Damned – The Impulsive Shawl – rainbow, bees, butterfly’s and beads – there are so many ways to add beads.
If you want to know more about the pictures below click on the picture. Some of them are linked to patterns.
But when I discovered bead knitting (beads knit into every stitch) I thought that here was a pinnacle of achievement. I have been working towards that pinnacle every since. My inspiration and resolution just got a big boost.
Treasure
I was in Victoria not too long ago, spending some quality granny time looking after my Grandson. As he is in school I had some time to wander around during the day. I visited family, met up with a friend and got myself into trouble of the best kind.
My daughter lives close to a wonderful little second hand store. I have been there a few times but this last time I found something I had never seen in real life, not outside of a museum. I have seen pictures in books or magazine articles – I found a small, exquisite, circular knit, beaded bag!
I did not buy it immediately. I went back to my daughter’s and slept on it, as it was not cheap. It was not useful and I wanted it. So I didn’t do much sleeping! I kept thinking and thinking and in the morning rushed back to the store and looked at it again. Who was I kidding – it was mine!
It is tiny, only 3 inches across and about 2 and 1/2 inches high, maybe three inches high if you include the closure. But it is perfect. A perfect little coin purse.
Kid Leather lined, designed to sit upright on a table, lavender cotton lace top and a beautiful, twisted silk cord… And the BEAD work!
Micro Bead Knit bag with Pink and Yellow and roses, deep green leaves and the bottom is a beautiful spiraling bottom, in a leaf and bud pattern. There is just 1 loose bead, you can see it resting in the center of the bottom of the bag. For its age it is in great shape!
This bag is roughly dated to the 1920’s and 30’s and unlike most beaded bags, which were designed only to hang this bag was designed to sit on the table and hold a few essentials, a bit of “mad” money, a compact perhaps, just the necessities necessary for a evening on the town.
These bags were mostly knit in Europe at this time. I can see a woman in a garret apartment in Paris madly knitting away and creating a bag for her month’s wages. I have knit with beads, a lot. But knitting circularly with such fine thread and micro beads… it boggles the mind.
My other beaded treasure was a gift from a customer, someone who wanted the bag saved and appreciated. I call it the Napier-Hemy bag to reflect the name of the original owners. This bag came to me in pretty rough shape. It is losing beads and had started to fall apart. But it is still beautiful. The work that went into such creations. The beads are smaller in this bag than in my new treasure. That allows for greater detail in the design. The colours are stronger too – less light exposure perhaps.
You might have noticed that I have been creating a few things with a tiny circular cast-on. lately I am playing with a crazy idea – I think I want to try knitting a small bag like this one.
I won’t knit my bag with such tiny beads, I am thinking of size 8/0’s and then of course what kind of pattern do I want to tackle with my beads? It can’t be too complex – I am not totally insane.
So Many Styles of Working with Beads
I am not without some experience in working with beads. I have tried a great many different beading techniques over the years. I have knit quite a few other beaded bags. Or shawls and tassels with beaded details. Beaded bracelets as well. I could incorporate aspects of these into a circular bead knit bag.
Beaded Mesh – Knitting with Beads
The yarn is BC Garn Tussah Tweed Silk
This is the Victorian Beaded Mesh Bag. It is a lot of beads and not quite so much knitting. But is was the start of my fascination with beads and beaded bags in particular.
I also designed a scarf, Victorian Beaded Mesh Scarf to co-ordinate with the bag. It is a little short scarf with beads at both ends. I have just started knitting myself a new version.
Being a small piece, knit in two pieces and grafted – it knits up relatively quickly and gives a great finish! It is also fun to wear!
I am making myself a new version just long enough to tie around my neck. You can see it’s progress in the pictures above.
You can use beads in so many ways in your knits! Below are just a few. Some of these are just pretty pictures of my work (well, I think they are pretty). If you want to know more about the pictures below click on the picture. Some of them are linked to patterns.
Just in case you want to be crazy too! Here is some information on different styles of working with beads in your knitting.
Beading Techniques:
Placed while Knitting – knitting with beads – beads are placed in pattern, but not creating a solid beaded surface
This technique is the most commonly used technique in modern knitting. A bead is carefully placed on a stitch as your knit. It can be placed before or after the stitch has been worked. When you place the bead determines which row it sits on.
The bead is placed with a small crochet hook or beading tool. The size of the hook is determined by the weight of the yarn and the size of the hole in the bead. I have a small collection of hooks from a .60mm to a 1.25mm. I always try to use the biggest hook possible, but some beads, especially the ones with the beautiful finishes have smaller holes.
.60mm hook with 8/0 bead – hook is ready to pick-up the stitchpicking up the stitchbead has been slipped onto the ststitch is ready to be worked
This technique allows you to place beads exactly where you want them as you knit. It requires a very small crochet hook – 0.6mm – 0.75mm most commonly (bead holes can vary, sometimes a bigger hook will work). Pick up a bead with the tip of your crochet hook, use the crochet hook to remove the next stitch from the left hand needle and then slide the bead down the hook and onto the stitch, return the stitch to the left hand needle and then work the stitch.
Beading Techniques: Pre-Strung Beads
Three beading techniques requiring pre-strung beads that I use; beaded long-tail cast-on, beads between purl stitches and knitted in beads. These are all pre-strung beads, easiest in one colour, more complicated with several colours.
Notes on Pre-stringing beads: All three of these techniques require that the beads be strung onto your yarn before you start knitting. The first time that you try knitting a pattern with beads I recommend that you work a pattern with knitted in beads, keep the pattern simple. A small repeat something that mistakes won’t show as much or will be easily fixed. That way as long as you have enough beads there won’t be any problem with beads not being strung in the right order. This is the simplest way of learning.
After the first time you will be able to decide if you want to knit in a coloured pattern. When working a coloured pattern the beads must be strung in the correct order. In order to do this you string the beads in the reverse order that they are being knit. The first bead knit is the last bead strung. Flip your chart upside down and use the reverse chart for the bead stringing order.
Pre-stringing Fixes: If the beads are out of order you will need to cut your yarn and fix the problem. An extra bead can be crushed with pliers. Work very carefully if crushing a bead the sharp edges can cut the yarn.
Beaded long-tail cast-on – beads are pre-strung and I usually bead every stitch or every other stitch, but for special beads, a different shape or size, the beads might be added less frequently. These beads are on the the tail (the length of yarn over your thumb). Start with your slip knot and immediately pull up 1 bead to rest close to the slip knot. *Cast on 1 (2 ) or desired number of stitches and then pull-up another bead.* Repeat from * to * until you have run out of beads and then finish your cast-on – this should give you the right number of stitches for your cast-on, if you had the right number of beads. Always check your count.
Beads between purl stitches – This is the easiest of the pre-strung beading techniques. The beads are pulled up and placed between your purl stitches The purl stitches hold them in place. This technique does not work well between knit stitches as they will fall to the purl side.
Fretwork mitten cuff – beads on the cast-on and beads between stitches in the ribbing.
Bead Knitting – creates a solid beaded surface
Method and rules: Knitted in Beads –
1) When knitting in your bead you will always knit into the back of the stitch on which you wish to place your bead. The twisting of the stitch by knitting through the back of the loop insures that the bead will be locked into place.
2) When the needle is in place in the back of the stitch, pull up the bead up to approx ¼ of an inch away from your knitting. As you knit the stitch, pull the bead through to rest on the front arm of your stitch.
3) The bead will be furthered anchored when the stitch on top of it is also knitted through the back of the loop. This is done when knitting the next row of beads in place. If beading the next row you will automatically twist the stitch with your current bead. If no bead is being knit into place simply knit into the back of the stitch above the bead to finish the anchoring process.
The beads have been knit in and are sitting on twisted stitches. You can see the twist below the beads. The bead have just been pulled through the stitch and the stitch is about to be removed from the LH needle.
If you are looking for more information on Knitting with Beads or Bead Knitting the Mary Thomas Knitting Book is still one of the best. It was originally published in 1936 and most of the modern writing on the topic references back to this book.
A New Project in the Planning Stage
I have collected so many colours of beads over my years of knitting. More than enough to create a completely bead knit bag. I would work it in Handmaiden Lace Silk. I have a good quantity of that to hand. It would certainly be easier to work with than a linen thread – if I could find some of this thread strong and long enough. The yarn for bead work like this has to be strong and long with no knots if I plan on stringing thousands of beads. And I am. Am I crazy?
So am I crazy? Or what? Are you crazy too?
If you are interested in more – I have just been looking at beads for the background. I usually order from Bead F/X in Toronto when I need a larger quantity of beads. They offer design size pkg of beads – approx 9000 beads per 250 grs of 8/0’s. These are the three possible colours that I am considering. Maybe you might want to check our some options for beading your knits.
Crystal AbSparkle PewterLight Steel Blue
I will probably only order two colours, but first I have to decide on my pattern colours and then pick the background! This may require some swatching. I dusted off my swatch instructions for bead knitting. If you are interested in giving it a try, this swatch is a fairly inoffensive way to begin.
Gloves have been a fashion statement for centuries.
Gloves have been designed to reveal and conceal. Jewelry was designed and sized to wear over them. Gloves are what we wear to be “seen”!
Gloves for a knitter are a perfect project. They are small projects and therefore very portable, much like socks, the common choice for an easy to travel with project. Best of all, unlike socks, gloves are seen immediately when worn. They can showcase a knitter’s skills and interests.
There are not many garments that we wear that can be said to reflect such diverse aspects of our individual psyches’.
Once you learn how to knit the glove hand – the back, palm, thumb and fingers – then there is the cuff.
When you start to knit gloves, the cuff is kept simple, after all learning all the small points of glove construction are the main points of difference between gloves and mittens. That is where to focus needs to be. There are bridges and forchettes (french for small gusset) in gloves! And fingers, they appear small and fiddly – but a finger only takes about 20min to knit!
I started to knit gloves because, well, I couldn’t find a commercial glove to fit my non standard hand. I have broad palms and short fingers. Gloves that worked for my fingers would never go over my palm, and gloves that fit my palm would leave me with an inch of extra fingers. I always wanted gloves that fit me, therefor I learned to knit gloves.
Once I learned to knit gloves – I started to play with the cuffs of gloves!
What wonderful small places to add so many interesting details! And for a while there was no stopping the experimentation! There were many more ideas tried and quite often ripped out because the idea didn’t work. You can see that beads played a prominent role in my glove designs. Gloves were meant to showcase jewelry and the hands of the people that wore them! And why not knit in our own bling!
Above is a selection of glove possibilities…. A couple of which you will see below as finished designs. The others are waiting to be redesigned or finished.
Below is a selection of Glove patterns that I have designed and either published myself or had published by others.
It has been a while since I designed any gloves. I think that needs to change. I have this new coat, maybe it needs some gloves. I do have two designs that I am working on. One a classic fair-isle and the other a long beaded cuff in lace… They might work! LOL!
I do design a lot of fingerless mittens with fancy cuffs as well. They are generally more popular than full gloves, quicker to knit for sure…. but there is something about a pair of fancy gloves…
We will mostly be using a small crochet hook to add beads to our knits but there is some optional knit in beads in the OakLeaf and Acorn Insert. This downloadable document will give you some basic information on working with beads.
The Oakleaf and Acorn insert employs both beads placed with a crochet hook and beads that prestrung and then knit into place. This section is still a month away but I thought that earlier is better than later.
It can be said with some authority that I am more than a little obsessed with beads and the many possibilities they offer for embellishment on our knits. It is more than a pity that our society really isn’t so much into the glittering styles of the past! I would so rock those days!
Rhiannon – knit with Buffalo Wool Co Sexy yarn and 20,000 + 24 k gold dipped delicas and crystals.
Knitting with beads – There are several methods for placing a bead onto knitted fabric: between the stitches, on one arm of the stitch or on both arms of the stitch. Some methods require that the beads be strung on the knitting yarn before knitting. Some are placed on the stitch as it is knit and others are added after the work is finished. The size of bead will determine whether it can be placed on the stitch or whether it needs a separate strand. If you are planning to use thousands of beads on a project, do work a sampler first to determine the most efficient method of working the beads. When stringing beads make sure that there are no knots in the yarn.
Pre-strung beads used for loops and beads placed between stitches in a garter stitch background.
Traditional bead knitting -The bead is placed on one arm of the stitch. All beads need to be pre-strung and if using multiple colours they need to be pre-strung in reverse order.
Bead knit gloves, mitts, gauntlets and jewelery!
A bead is placed on an arm of each stitch, as you are knitting through the back of the loop. This style of knitting will have a tendency to bias. This is not a problem if the fabric is knit circularly. (Which is the only way I will tackle it!) Most Victorian purses were worked circularly and the biasing was not readily noticeable. The other advantage of working circularly is that you do not need to work a purl stitch through the back (try purling through the back of a loop and placing a bead at the same time!) Bead knitting used to be worked with small (think micro) seed beads and silk or cotton thread and very fine steel needles. There are still knitters who work in this way.
I work bead knitting with small beads (not micro) and fine yarns – lace or fingering weight yarns (not threads) and small needles, anything from 2.0mm US#0 to 2.75mm US 2. I haven’t done any bead knitting for quite a while. I have taught both styles of bead knitting but always had a hard time convincing others that working traditional bead knitting was worth the effort!
I still use a lot of beads in my knitting but they are mostly placed with a small crochet hook, and not always pre-strung as in traditional bead knitting.
So, when I decided to knit a pair of gloves with some beautiful new yarn I also decided to knit myself a beautiful bead knit edge for those new gloves.
I am seeing a short beaded gauntlet with either short finger gloves or mitts! But maybe I won’t be able to resist the lure of a proper pair of gloves! These gloves are my “swatch” for the yarn. From this I can learn about the yarns strength, how or if it has a “halo”. How much will it stretch (alpaca has no memory – so if it stretches it won’t go back). And I have something useful at the end of the knit. Many of my hats are gauge swatches. A trick that Elizabeth Zimmermann suggests as a means to learn your yarn and create something useful at the same time!
The yarn is a breeze to knit with. And yes, there is a lovely halo. The yarn is also handling the weight of the beads without too much obvious stretch. So I will continue on, and isn’t it a beautiful colour?
I was wondering if anyone would be interested in a workshop this summer to learn how to bead knit…. I would love to lead you down the garden path and introduce you to another side of working with beads and knitting!?
Check out the Orchid! It is still kicking and has opened some new blossoms!
