Le Tissier Designs

Of Larks and Linnets and Flying Fingers

Category: mending

  • Exciting April Knits: April Square and Mending Kit Designs

    Exciting April Knits: April Square and Mending Kit Designs

    It is April first and I was scrambling last night to finish the Fancy for this month! Where ever did March go? Though I am rather pleased with both the fancy and the square for this month.

    The Square

    The stitch pattern for the square was new to me. I found a picture on Pinterest and turned it into a pattern! As a bonus the stitch pattern is reversible. So I designed a shawl to be knit with the same pattern. Yarn and pattern went off to Jana (my test knitter) on Monday! I am very excited to see if my idea works out.

    The shawl will be a traditional top down triangle. It will be reversible and have a pointy edging. Stay tuned for updates. I haven’t had any feedback from Jana yet. So everything must be working out. Right!?

    April Shower1Download

    The Fancy

    I must admit that I had way too much fun designing and then knitting the fancy.

    This months Fancy is a mending kit, something that can travel with you. It holds all the necessary tools. It includes a pocket for scissors and mending threads. There is also a little yarn for darning. A sheet for various styles of needles is provided. On the back, a few buttons are sewn, ready for a “button” emergency.

    The fancy with knit with non-superwash wool. I embellished a couple of the pieces with small beaded and knit flowers. I also added just a little bit of embroidery for the leaves. Then I fulled the pieces for extra strenght and durability. It was fun because I used my hands to rough up the pieces in the hot water. It was also very therapeutic.

    April FancyDownload

    This month will most likely be just as busy. I am working on designs for the next series of classes. And I have this idea of how I want to put my blocks together… More on that later this month.

    Kitchen Reno

    The kitchen is done. The wool room has been delayed a couple of weeks. I will share before and after pictures this weekend. I will have three days and time to share all the kitchen wonders with you!

    Happy Knitting

    Lynette

  • Mending 101 – Part 2

    Mending 101 – Part 2

    Mending a Ribbed Cuff – replacing the rib

    Yesterday I mended the blue sweater cuff. It took about two and a half hours, including the knitting time. Why did I wait so long? I’ve had the yarn for close to three years! Other things kept getting in the way. And I would rather knit than mend! Wouldn’t you?

    I am working on changing that attitude within myself.

    This sweater was knit in the round. Bottom up for the body, but top down for the sleeves.

    At the time, I knew my yardage was limited and I wanted to make sure that each sleeve was the same and that the yardage went as far as possible. Top-down knitting is the best way to make that happen. It worked well for this project. I finished the sweater with only a little of the main shade of blue to spare.

    The original yarn was a dk, so I decided to work the cuff with a set of 3.5mm US #4 dpn’s.

    Top-down knitting also makes it easier to mend/replace the bits that wear out, like the sleeve cuffs. Had I knit the sleeves from the cuff up I would have had to cut the knitting at the join of the cuff and very carefully retrieve my live stitches above the cuff. That will be a demonstration for another day and a different sweater!

    When working with an older sweater, the stitches will not usually run down the knitting in the same way as a garment that you are working. After a certain amount of time the yarn itself has been almost pressed into shape with folds and bends. You can see in the unraveled yarn and stitches at the end of the cuff (4th picture in the sequence) that the shape is set and unwilling to move. A bonus, one that makes the work you are trying to achieve a little easier.

    The wrist is frayed right at the beginning/end of the round. Which makes it slightly more complicated to pull back as the end has been woven in down towards the cuff.
    Scissors will be needed to cut the yarn every time it hits the woven in tail, Once the end of the knitting is found the knitting will pull back easily, except where the tail yarn has been woven into the fabric. Scissors were used to cut the knotted area and the wrist kept on unravelling.
    The end is gone and the unravelling speeds along.
    Once the knitting is pulled back to the sleeve, pull the next round out carefully, As you pull catch each stitch revealed with a dpn. Continue to pull back the last round, switching dpn’s as they are filled. Use 3 or 4 dpn’s to hold the stitches depending upon your comfort level with dpn use.
    Once all of the stitches have been picked up, cut off the old yarn leaving an 8 inch tail. Weave in the tail as you knit the first round of the new ribbed cuff.
    I had 68 sts on the needles but the cuff had been 48 sts. The sleeve had been reduced by 20 sts in the cuff. So I worked an extra round, reducing as I knit, to match the 48 sts, before starting the ribbing.

    I am very happy with the results. The new blue cuff is not perfect, but perfect enough for a sweater that was knit in 1990, 34 years ago. The neck may be the next piece that needs replacing, I noticed some wear along the back, but that is a problem for another day!

    Happy Mending

    Lynette

  • Mending 101

    Mending 101

    This Fall and Winter and I am undertaking a self taught mending course. I started it yesterday by mending a few moth holes in my favourite vest and what I call my weekend sweater!

    I had hoped to work on these things in the summer for a Winter Class but the best laid plans….. So better now than not at all! See On the Mend.

    Needle Felting

    Small holes in our knits can be repaired with a few basic needle felting tools and some fibre. I did not realize how easy this would be or I would have tried it years ago! There are some other methods of dealing with small holes, embroidery stitches offer many options! But this is easy and fast!

    All you need is holes, a needle felting needle, fibre and a sponge (which is underneath the hole). I started in the back to give the hole backing. I did not need to do this. Just felting from the front works fine.
    Back is finished.
    Front after the back was done, You can see the shading of the fibre after has been needle felted through the knit. So I felted again on top of this fibre. My hole is a little on the stiff side with two sides needle felted.
    One dot looked foolish, so I added a few more spots.
    You can see that this has been folded for quite a while! Needs a wash and then it will be ready to be worn again!

    The second sweater with a hole was a much simpler project. This sweater is what I call my weekend sweater. I throw it on over when I just need a little more warmth. It was knit with sock yarn when the patterning sock first came out, so about 24 years ago. There was only 1 hole in the back, So I filled it up with fibre and called it done!. I did play around with it a little, added a little bit of an edge and curlicue!

    I had hoped to get another sweater mend underway, this one needs a new ribbing at the wrist. The sweater is over 30 years old but still looks great, no pilling and the colours are still vibrant! Well worth repairing, especially as it’s big, boxy style is coming back.

    Several years ago I had to replace the ribbing on the other wrist, I had caught it on something sharp and that had broken the bind-off (the sleeves had been knit from the top down – best way when yardage was short). I had used up all of my remaining yarn with that repair. So finding a close colour took a while, then the yarn I found got put away in my stash, so this sweater has been waiting for about three years. You can see in the photo the colour is not perfect, but it will make the sweater wearable again, not bad for a 30+ year old sweater!

    Yesterday I put the work in and found the yarn! That took a little time, you know, the needle in the haystack approach! So after looking for the yarn, I did not have time to do the work – but this weekend it will happen!

    The original yarn was a wool from New Zealand, gorgeous blues in 4 tones. The pattern was an early Kaffe Fassett pattern in about 36 colours, so I simplified it a little!

    I have quite a few other pieces to mend and I want to try many different techniques! So my Fall knitting projects are booking up fast!

    How is your Fall planning coming along?

    Happy Knitting and Mending

    Lynette

  • What’s Now? What’s Next?

    What’s Now? What’s Next?

    Tomorrow we are going to Surrey (across the big water). The World Men’s Fastball Championships are there. So we are going for a day of ball! I am going to be knitting as well as watching and there is nothing like Ferry travel to enhance one’s knitting time!

    I will be taking a half knit sweater for myself. I started it a couple of years ago with some beautiful Italian Wool from Gathering Yarns. Just a basic top-down v-neck and since the yarn was limited I had to get creative with the colours. Just some simple striping but it is very effective with the slightly varigated colours.

    It is such a rich yarn, full of texture and the two colours are blending beautifully.

    Why wasn’t it finished a while ago? Well, one time when I tidied, the project went in one place and the yarn went in another. I would find one and never the other. So this time when I found the extra yarn I put in on my desk, after I had cleaned it up and had a clear surface! Remember that big clean up? Yesterday I stumbled across the project! A match! And it is so close, arms and maybe a third of a body and it is chunky!

    Looking for the next project? I seem to be in constant search lately. I have several projects on the go. My main focus is the Greenman Shawl and it is really taking over. I am already planning the next section. But I do need to look to my classes for work as well. What is your next project?

    I am working on the thrummed mittens to go with the headband. I do enjoy thrumming such a relaxing way of working in colour. And I love the wool I am using, Shelter, by Brooklyn Tweed.

    Look deep into my mitten. Doesn’t it look warm and cozy?

    And for something new I am going to try to finish off the sleeves of an old sweater. Knit with Mountain colours hand dyed Weavers Wool it is gorgeous. It is now slightly felted and starting to wear at the end of the sleeves. So I am going use an old English (or European Technique of finishing things that wear with leather. I found an absolutely stunning piece of leather from Gala Fabrics last time I was there. It is a glorious shade of blue and is perfect!

    Has anyone tried this technique? Any tips!?

    I hope that you are having a great day!

    Happy Knitting

    Lynette

  • On the Mend

    On the Mend

    Nope I haven’t been sick, but I am looking to mend!

    I am going to learn how to mend my clothing. Well, I am teaching myself how to mend my woolens mostly.

    I have been a sewer, (sewist?) all my life. I started with Barbie clothes and I have made my own and my children’s clothing, at various point of my life, with varying levels of success. I have designed and created costumes for live theatre. And I can mend many of of clothes, as in hem, fix seams, adjust fit and play with anything fabric. But I have seldom mended my clothing, as in fixing actual holes in the fabric! That needs to change.

    I also knit. And I have knitted steadily for the last 40+ years. Like most of us knitters I have a stack of woolens to mend. I hate to throw things out, especially now, when we are talking of sustainability and slow clothes and making everything count. So I have been looking at my own pile of clothes that need saving. From woolen undershirts (sorry, they are not pretty enough to be called camisoles) to fine merino sweaters to my handknits – I have things that need mending.

    So, over the last few months I have been collecting books and tools to start teaching myself the basics. Okay, not just the basics, in some cases the more interesting and artistic ways of doing things!

    Not that I will be starting with the fancy patterns, but the possibilities are interesting.

    I am also going to learn how to use a tiny punch needle, really a needle for tambour bead embroidery. Beads as mending! you can see that this is a whole new rabbit hole for me! For mending you are supposed to forgo the beads and just use a fine wool to punch through your knit fabric. And I have just purchased a Speedweve style mending tool. A small one (14 hooks), with a bigger one (21 hooks) on the way.

    Tambour beading is a technique that developed in Europe in the late eighteenth century. A small hook (tambour hook) is used to attach the beads to the ground cloth, rather than a needle. The word tambour is French for ‘drum’ and is named after the drum-shaped tensioning frame that was originally used.

    Plus there are the traditional means of mending as in swiss daring, patching and overdying. Overdying is a great way to recover sweaters that have been stained by life. I have used this method a few times! I would also like to try some leather patching for sweaters, especially hems at neck and sleeves. So, lots of things to explore!

    This is going to be so much fun!

    And then, this fall, there will be a class at Mad About Ewe Fine Yarns in Nanaimo. After all, there are not many things better than sharing an interest!

    Happy Mending

    Lynette